Chinese | English

Product List 
·YM single-armed press series
·Y41 single-pole revised compressing hydraulic press series
·YM four-pole two-beam press series
·YM32a four-pole universal hydraulic press series
·YM32B four-pole universal hydraulic press series
·Y27 single-acting sheet stretching hydralic press series
·Y28 double-acting sheet stretching hydralic press series
·YM27 framed hydraulic press series
·YS31 Double-pole steering hydraulic press series
·YM portal forcing press series
·YM30 desk-top single-pole universal hydraulic press series
·Y33 up-run movable four-pole hydraulic press series
·Y35 motor press series
·YW horizontal hydraulic press series
·Y71 plastics hydraulic press series
·YK79 powder goods hydraulic press series
·YH four-pole internal guide hydraulic press series
·Y41B single-arm axis leveler series
·Y41C single-arm plates leveler series
·YL41 double-side single-arm hydraulic press series
·YZH double-pole hydraulic leveler series
·YQ four-pole light hydraulic press series
·800T-2000T four-pole hydraulic press series
·Special press and samples
·Automobile maintaining device series
·Automobile frame hydraulic press cold riveting clamp
 
Product show Home > Product show
Automobile maintaining device series
 

Automobile frame hydraulic press cold riveting clamp

 

Type
Unit
YMQ-42T-1
YMQ-42T-ll
YMQ-42T-III
YMQ-36T-1
YMQ-26T-3A
YMQ-26T-3B
Nominal pressure
KN
420
420
420
360
260
260
Liguid working force
Mpa
31.5
31.5
31.5
30
20
25
Travel
mm
240
200
190
200
200
200
Center height
mm
360
250
300
150
100
150
Jaw diameter
mm
380
300
300
380
260
200
Rivet diameter
mm
10~18
10~18
10~18
10~14
10~12
10~12
Outside size
mm
1400×700×200
1270×700×190
1270×700×190
900×480×200
900×350×140
900×350×130
Rivet jaw net weight (approximate)
Kg
350
230
237
238
136
130

 

 

 

 

 

 


 

 

 

TM-210-100A/F hydraulic press horizontal braking riveting machine

 




Features:
The max riveting and sending center height: 210mm
Working travel: 110mm
The heat output of hydraulic press system is air swept type

 

 

LC-568 engine driver tyre remover and fixer




Features:
1、It can remove and fix the vacuum and layering tyres of all kinds engine drivers, farm machinery tyres and engineer machinery tyres.

 2、It applies the imported hydraulic press electric control gear with little noise, long-life performance, high degree of mechanization which can decrease the working intensity but improve the working effective.
3、 Far away from hand operation which can enhance the security and keep the tyre edge and wheel felloe safe.

 
 

Technical parameters:

  The suitable size for rim355-660mm
 

The max tyre weight:1300kg

The tyre width: ≤686mm

The tyre diameter:  ≤1500mm

Hydraulic press pump motor: 1.5kw/380V

Turbine box motor : 1.5kw/380V

The working force of hydraulic press pump: ≤13Mpa

 Shape dimension:2100X1600X900mm

 

 

Presentation of high pressure oil pump testing platform



 

Features:

1. Host machine frequency control.

2. High torque output, small falling speed value and high measurement precision.

3. The rotate speed, numeration and temperature are showed by number.

4. Automatic control the oilburing temperature.

5. Preset the rotate speed high limits.

6. Set air supply in both plus-minus and subpressure systems.

7. With 12V/24V direct current.

8. With the overpressure, overload and overheat protection funcition.

 

CA2005 Four-wheel cart





It measured data boxes, wheel Angle measuring precision rotary match boxes of data within the kingpin inclination Angle and after,
With laser and the effective size scale are amplified the benchmarking and yardstick to measure wheel of (or negative)
The geometric relationships and workshop. One WaiQing kingpin obliquity, within wheels, the readout resolution 6 ',
Measurement error less than ± 3, steering Angle readout resolution for 6 'measurement errors, nor more than ± 6',
Instead of using X-ray amplification principle of measurement, with laser measurement accuracy,
Thus for wheel jouncing provides reliable measurement methods, especially for the wheel steering wheel correct orientation
For a reliable basis. Fixed installation and equipment, cover an area of an area small. Portable, so to give you a great convenience.

 

 

 

T8363 stepless timing braking drum unit




The main technical parameters: T8363
The fabrication diameter scope(mm): 50-630
Workpiece rotate speed: 35 53
Working travel of slide: 450
Motor power: 1.5
Outside size: 830X660X1410
Packing size: 1100X1000X1500
Net / Gross: 860/930

 

T8365 stepless timing braking drum unit



The main technical parameters: T8365
The fabrication diameter scope(mm): 180-650
Workpiece rotate speed: 35 53
Working travel of slide: 450
Motor power: 0.85/1.1
Outside size:930X600X1410
Packing size: 1200X1050X1650
Net / Gross: 900/1000

 
【back】  【close】  

 


Copyright ©2010 Tengzhou Cavee Mechanics Equipment Co. Ltd. All Rights Reserved.
The host company: Tengzhou Cavee Mechanics Equipment Co. Ltd Mobile: 0086-13806376780 Add: Jiangtun Housha insudtry zone, West Xueyuan road, Tengzhou
XML 地图 | Sitemap 地图